Hikvision DS-2CE56D1T-IRM manual

Hikvision DS-2CE56D1T-IRM
7.6 · 2
PDF manual
 · 2 páginas
Inglés
manualHikvision DS-2CE56D1T-IRM
TVI Turret Camera
User Manual
Thank you for purchasing our product. If there
are any questions, or requests, please do not
hesitate to contact the dealer.
This manual applies to
This manual may contain several technical
incorrect places or printing errors, and the
content is subject to change without notice.
The updates will be added to the new version of
this manual. We will readily improve or update
the products or procedures described in the
manual.
Regulatory InformationFCC Information
FCC compliance: This equipment has been
tested and found to comply with the limits for a
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated in
a commercial environment. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed and used
in accordance with the instruction manual, may
cause harmful interference to radio
communications. Operation of this equipment in
a residential area is likely to cause harmful
interference in which case the user will be
required to correct the interference at his own
expense.
0100001040919
FCC Conditions
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful
interference.
2. This device must accept any interference
received, including interference that may
cause undesired operation.
EU Conformity Statement
upon the purchase of equivalent new equipment,
or dispose of it at designated collection points.
For more information see:
www.recyclethis.info.
2006/66/EC (battery directive):This
product contains a battery that cannot
be disposed of as unsorted municipal
waste in the European Union.
See the product documentation for specific
battery information. The battery is marked with
this symbol, which may include lettering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg).
For proper recycling, return the battery to your
supplier or to a designated collection point. For
more information see: www.recyclethis.info.
This series of camera adopts new generation
sensor with high sensitivity and advanced circuit
design technology It features high resolution,.
low image distortion and low noise, etc , which.
makes it suitable for surveillance system and
image processing system.
l High performance CMOS sensor and high
resolution bring high-quality image;
l Low illumination;
l OSD menu, parameters are configurable;
l Support auto white balance, auto gain control,
Support image effect adjustment;
l
l
Unit transmission control;
l Advanced 3-axis design meets different
installation requirements.

1 Introduction

1.1 Product Features1.2 Overview
UD.6L0201D1603A01
2012/19/EU (WEEE directive):
Products marked with this symbol
cannot be disposed of as unsorted
municipal waste in the European
Union. For proper recycling, return
this product to your local supplier
Please refer to the product specification for
camera parameters and functions.
This product and - if applicable - the
supplied accessories too are marked
with "CE" and comply therefore with
the applicable harmonized European
standards listed under the Low Voltage Directive
2006/95/EC, the EMC Directive 2004/108/EC,
the RoHS Directive 2011/65/EU.
1.2.1 Overview of Type I Camera1.2.2 Overview of Type Camera
II
Enclosure
HD Video Cable
Mounting Base
1.2.3 Overview of Type CameraIII

2 Installation

Before you start:
l Please make sure that the device in the package
is in good condition and all the assembly parts
are included.
l Make sure that all the related equipment is
power-off during the installation.
l Check the specification of the products for the
installation environment.
l Check whether the power supply is matched
with your power output to avoid damage.
l Please make sure the wall is strong enough to
withstand three times the weight of the camera
and the mounting.
l If the wall is the cement wall, you need to insert
expansion screws before you install the camera.
If the wall is the wooden wall, you can use
self-tapping screw to secure the camera.
l If the product does not function properly,
please contact your dealer or the nearest
service center. Do not disassemble the camera
for repair or maintenance by yourself.
2.1 Installation of Type CameraI
Steps:
1.Drill the screw holes according to the drill
template.
Figure 2-1 The Drill Template
2. Screw the clip plate onto the mounting base
loosely.
Power Cable
HD Video Cable
Mounting Base
Camera
Trim Ring
Enclosure
Power Cable
Camera
Trim Ring
Enclosure
Camera
HD Video Cable
Power Cable
Mounting Base
3. Fix the mounting base to the ceiling with the
supplied screws.
4.Route the cables to the cable hole and connect
the corresponding power cable and video cable.
5.Pull out the clip plate and secure the camera
with the trim ring to the mounting base.
6.Push the clip plate in and tighten the lock screw
to secure the trim ring.
Figure 2-2 Screw the Clip Plate
Clip Plate
Screw hole

TURBO HD

Type
Type
Type
Type
I
II
III
Model
DS-2CE56D1T-IRM
DS-2CE56D1T-IT3
DS-2CE56D1T-IR
Side Opening

Manual

Ver el manual de Hikvision DS-2CE56D1T-IRM aquí, gratis. Este manual pertenece a la categoría Cámaras de seguridad y ha sido calificado por 2 personas con un promedio de 7.6 . Este manual está disponible en los siguientes idiomas: Inglés . ¿Tienes alguna pregunta sobre Hikvision DS-2CE56D1T-IRM o necesitas ayuda? Haz tu pregunta aquí

¿Necesitas ayuda?

¿Tiene alguna consulta sobre el Hikvision DS-2CE56D1T-IRM y la respuesta no está en el manual? Haga su consulta aquí. Proporcione una descripción clara y completa de su problema y su consulta. Cuanto mejor describa su problema y consulta, más fácil será para otros propietarios de Hikvision DS-2CE56D1T-IRM proporcionarle una buena respuesta.

Número de preguntas: 0

Hikvision DS-2CE56D1T-IRM especificaciones

A continuación encontrará las especificaciones del producto y las especificaciones del manual del Hikvision DS-2CE56D1T-IRM.

General
Marca Hikvision
Modelo DS-2CE56D1T-IRM | DS-2CE56D1T-IRM-6MM
Producto Cámara de seguridad
EAN 813908020922, 0813908028126
Idioma Inglés
Tipo de archivo Manual de usuario (PDF)

Preguntas frecuentes

¿No puede encontrar la respuesta a su consulta en el manual? Puede encontrar la respuesta a su consulta en las preguntas frecuentes sobre el Hikvision DS-2CE56D1T-IRM más abajo.

¿No aparece tu pregunta? Haz tu pregunta aquí

No hay resultados